Linear motor-1
CGM-linear motor3
The CGM-linermotor synchronous linear motors are the cooled power packs of linear actuators. The UL-certified motors are fitted with a highly efficient cooling system. This enables even higher continuous forces and due to forced cooling, no additional process heat is introduced during machine construction. The linear motors in the CGM-linermotor series achieve extremely high thrust and acceleration. The benefits of the linear motors make them the preferred choice in fields with very high loads as well as in applications in which no additional process heat must be introduced.
Quantity:
The linear servomotor series has a modular coil concept, so that each primary part consists of identical segments. As a result, not only are the linear motors on the whole very short, but also a precisely symmetrical assembly is created that establishes screw-on compatibility between all linear motors in a series. In addition, the design increases the flexibility and the adaptability to customer requirements. Within the maximum number of coils of 45, any length can be produced in steps of 3 with no great effort.
| Type | continuous thrust | continuous current | Peek fore | peek current | Feed back | accuracy | Total of length | Total height |
| GG10A-CP1-S-S2-SXXX-1-A | 60 | 6.9Arms | 360N | 6.9Arms | 0.1um/0.5um/lum（Grating/magnetic grid） | Grating=±10um | min430mm ~ max 4200mm | 37 |
| magnetic garid=±3um | ||||||||
| GG14A-CP2-S-S2-SXXX-1-A | 90 | 6.9Arms | 360N | 6.9Arms | 0.1um/0.5um/lum（Grating/magnetic grid） | Grating=±10um | min430mm ~ max 4200mm | |
| magnetic garid=±3um | 37 | |||||||
| GG17A-CP3-S-S2-SXXX-1-A | 110 | 6.9Arms | 360N | 6.9Arms | 0.1um/0.5um/lum（Grating/magnetic grid） | Grating=±10um | min430mm ~ max 4200mm | 37 |
| magnetic garid=±3um | ||||||||
| GG21A-CP4-S-S2-S6XXX-1-A | 150 | 6.9Arms | 360N | 6.9Arms | 0.1um/0.5um/lum（Grating/magnetic grid） | Grating=±10um | min430mm ~ max 4200mm | 37 |
| magnetic garid=±3um |